AREDN Go Kit with a router, 48V Active POE (9 ports: 6 phones, 3 cameras), 24V Passive POE (MikroTik AREDN hAP ac2 router and RF access point dish), and 6 ports for regular non-powered connections. The setup is designed to connect over regular internet (if available) through the white jack or to an AREDN dish for RF connections through the yellow jack.
This kit is in a 10″ rack 4U system with a 12V power input, transformers for 24V and 48V power in the lower section, the AREDN router and normal Ethernet connection points in the second tier, and the 48V POE switch in the fourth section. It also hosts a Raspberry Pi 3B+ computer that serves as a web server for forms and a BBS/Winlink/mail server node.
Costs:
- 10″ rack = $60
- MikroTik Router = $50
- Moherlink POE switch = $40.00
- Unmanaged (no name) switch = $5.00
- Transformers = $16.00 each (12V to 24V and 12V to 48V)
- Raspberry Pi with metal case = $50.00
- Watt Meter = $15.00
- Ethernet jumpers and adaptors= $2.00 ($0.50 each)
- Various 5.5×2.1 plugs and PowerPole connectors = $10.00
Total = $265.00 (approximate)
Ubiquiti LiteBeam 5AC Gen 2 = $60.00 (for RF connection to an AREDN access point)
The idea is to have a quick and easy way to set up emergency data communications. With minimal networking knowledge and an 8.5″ by 11″ instruction sheet, it can be set up and run to provide services during an event or incident in less than 30 minutes.



Leave a Reply